Kromschroder BCU 465-3/1LR3GBS4ACB1/1, burner control unit (88611300)
Brand: Kromschroder
SKU:
88611300
Kromschroder
88611300
Shipping methods
TNT delivery service
Pick up in our office
Payment methods
Invoice payment
Cash
Kromschroder burner control unit, series 400
Housing for on-site mounting, for controlling, igniting and monitoring impulse-controlled, modulating or stage-controlled gas burners. For continuous operation with ionization control or UV control using Kromschroder UV sensor UVD. Intermittent operation with UV sensor UVS. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EC-type tested and certified, AGA, FM, EAC and CSA approved, certified for systems up to SIL 3 (compliant with PL e).
Version for extended air control
Safety time on start-up tSA: 3 s
Safety time during operation tSB: 1 s
Air valve control
Mains voltage: 115 V AC, 50/60 Hz
Ignition transformer TZI 7,5-12/100
Front film in English with additional stickers in D, F, I, NL, E
4 start-up attempts
Air flow monitoring
With circuit board for signal distribution
PROFIBUS DP interface
Integrated Variosub PROFIBUS DP chassis socket, 9-pin
06 Air flow monitoring during purging
07 Air flow monitoring during operation
39 Pre-ventilation time after safety shut-down: 0 s
40 Pre-ventilation for restart/start-up attempts
41 Pre-ventilation after reset
04 Switch-off threshold, burner/pilot burner: 1 micro A
12 Fault lock-out in the event of burner failure in operation
15 Flame simulation check in start-up position/standby
20 Minimum burner on time tB: as safety time on start-up tSA(2)
21 Minimum burner pause time tBP: 0 s
23 Burner/pilot burner flame proving period tFS1: 0 s
30 Air valve can be activated externally
31 Air valve cannot be activated externally on start-up
32 Air valve can be activated in the event of malfunction
34 Burner on time in Manual mode limited to 5 min.
37 Pre-ventilation time tVL: 0 s
38 Post-ventilation time: 0 s
Pre-wired for double-electrode operation
Minimum time between two start-ups: 10 s
Housing for on-site mounting, for controlling, igniting and monitoring impulse-controlled, modulating or stage-controlled gas burners. For continuous operation with ionization control or UV control using Kromschroder UV sensor UVD. Intermittent operation with UV sensor UVS. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EC-type tested and certified, AGA, FM, EAC and CSA approved, certified for systems up to SIL 3 (compliant with PL e).
Version for extended air control
Safety time on start-up tSA: 3 s
Safety time during operation tSB: 1 s
Air valve control
Mains voltage: 115 V AC, 50/60 Hz
Ignition transformer TZI 7,5-12/100
Front film in English with additional stickers in D, F, I, NL, E
4 start-up attempts
Air flow monitoring
With circuit board for signal distribution
PROFIBUS DP interface
Integrated Variosub PROFIBUS DP chassis socket, 9-pin
06 Air flow monitoring during purging
07 Air flow monitoring during operation
39 Pre-ventilation time after safety shut-down: 0 s
40 Pre-ventilation for restart/start-up attempts
41 Pre-ventilation after reset
04 Switch-off threshold, burner/pilot burner: 1 micro A
12 Fault lock-out in the event of burner failure in operation
15 Flame simulation check in start-up position/standby
20 Minimum burner on time tB: as safety time on start-up tSA(2)
21 Minimum burner pause time tBP: 0 s
23 Burner/pilot burner flame proving period tFS1: 0 s
30 Air valve can be activated externally
31 Air valve cannot be activated externally on start-up
32 Air valve can be activated in the event of malfunction
34 Burner on time in Manual mode limited to 5 min.
37 Pre-ventilation time tVL: 0 s
38 Post-ventilation time: 0 s
Pre-wired for double-electrode operation
Minimum time between two start-ups: 10 s
Replacing a Kromschroder BCU 465-3/1LR3GBS4ACB1/1, 88611300 burner control unit is a good solution to make your equipment work again. We offer a wide range of Kromschroder spare parts for burners, gas trains etc. We supply original Elster (Kromschröder) & Honeywell (Maxon) products.
If you have any queries about Kromschroder burner control or any other Kromschroder spare parts, please write us at 624burner@gmail.com, quoting the item code 88611300.
- Voltage 115 V AC
- Weight, kg 5,1
- Commodity code 85371098
- Country of origin DE