Kromschroder BCU 465T-10/2L5R8-OCB1/1, burner control unit (88612084)
Brand: Kromschroder
SKU:
88612084
Kromschroder
88612084
Shipping methods
TNT delivery service
Pick up in our office
Payment methods
Invoice payment
Cash
Kromschroder burner control unit, series 400
Housing for on-site mounting, for controlling, igniting and monitoring impulse-controlled, modulating or stage-controlled gas burners. For continuous operation with ionization control or UV control using Kromschroder UV sensor UVD. Intermittent operation with UV sensor UVS. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EC-type tested and certified, AGA, FM, EAC and CSA approved, certified for systems up to SIL 3 (compliant with PL e).
Version for extended air control
T-product, FM and CSA approved
Safety time on start-up tSA: 10 s
Safety time during operation tSB: 2 s
Air valve control
Low fire over-run time: 5 s
Mains voltage: 115 V AC, 50/60 Hz
Ignition transformer TZI 7,5-20/33
With POC check
With circuit board for signal distribution
PROFIBUS DP interface
Integrated Variosub PROFIBUS DP chassis socket, 9-pin
09 Position indicator feedback
39 Pre-ventilation time after safety shut-down: 0 s
04 Switch-off threshold, burner/pilot burner: 1 micro A
12 Fault lock-out in the event of burner failure in operation
20 Minimum burner on time tB: 5 s
21 Minimum burner pause time tBP: 0 s
23 Burner/pilot burner flame proving period tFS1: 0 s
30 Air valve opens with V2
31 Air valve can be activated externally on start-up
32 Air valve closed in the event of malfunction
35 UVS check (1 x in 24 hours)
34 Burner on time in Manual mode limited to 5 min.
37 Pre-ventilation time tVL: 0 s
38 Post-ventilation time: 0 s
Pre-wired for double-electrode operation
Minimum time between two start-ups: 30 s
Housing for on-site mounting, for controlling, igniting and monitoring impulse-controlled, modulating or stage-controlled gas burners. For continuous operation with ionization control or UV control using Kromschroder UV sensor UVD. Intermittent operation with UV sensor UVS. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EC-type tested and certified, AGA, FM, EAC and CSA approved, certified for systems up to SIL 3 (compliant with PL e).
Version for extended air control
T-product, FM and CSA approved
Safety time on start-up tSA: 10 s
Safety time during operation tSB: 2 s
Air valve control
Low fire over-run time: 5 s
Mains voltage: 115 V AC, 50/60 Hz
Ignition transformer TZI 7,5-20/33
With POC check
With circuit board for signal distribution
PROFIBUS DP interface
Integrated Variosub PROFIBUS DP chassis socket, 9-pin
09 Position indicator feedback
39 Pre-ventilation time after safety shut-down: 0 s
04 Switch-off threshold, burner/pilot burner: 1 micro A
12 Fault lock-out in the event of burner failure in operation
20 Minimum burner on time tB: 5 s
21 Minimum burner pause time tBP: 0 s
23 Burner/pilot burner flame proving period tFS1: 0 s
30 Air valve opens with V2
31 Air valve can be activated externally on start-up
32 Air valve closed in the event of malfunction
35 UVS check (1 x in 24 hours)
34 Burner on time in Manual mode limited to 5 min.
37 Pre-ventilation time tVL: 0 s
38 Post-ventilation time: 0 s
Pre-wired for double-electrode operation
Minimum time between two start-ups: 30 s
Replacing a Kromschroder BCU 465T-10/2L5R8-OCB1/1, 88612084 burner control unit is a good solution to make your equipment work again. We offer a wide range of Kromschroder spare parts for burners, gas trains etc. We supply original Elster (Kromschröder) & Honeywell (Maxon) products.
If you have any queries about Kromschroder burner control or any other Kromschroder spare parts, please write us at 624burner@gmail.com, quoting the item code 88612084.
- Voltage 115 V AC
- Weight, kg 5,1
- Commodity code 85371098
- Country of origin DE