Kromschroder FCU 500WC0F1H0K1-E, protective system control (88621188)
Brand: Kromschroder
SKU:
88621188
Kromschroder
88621188
Shipping methods
TNT delivery service
Pick up in our office
Payment methods
Invoice payment
Cash
Kromschroder protective system control
Housing for control cabinet installation, for monitoring and controlling central safety functions in multiple burner systems on industrial furnaces, long service life due to replaceable power module for fail-safe outputs. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EC-type tested and certified, CSA and FM approved, certified for systems up to SIL 3 (compliant with PL e).
Series 500
Mains voltage: 230 V AC, 50/60 Hz
No integrated tightness control or POC
Modulating capacity control with interface for actuator IC
No temperature monitoring
Screw connection terminals
EU certified, CSA and FM approved, certified for systems up to SIL 3 (compliant with PL e)
Individual packaging
10 Emergency stop with fault lock-out
15 Air deficiency cut-out with fault lock-out
19 Safety time during operation: 1 s
27 No pre-purge during high temperature operation
29 Fan switched on in the event of fault
30 Fan run-up time tGV: 30 s
31 Fault lock-out if fan not running
32 Air flow monitoring during controlled air flow off, external valve controller enable
34 Pre-purge time tPV: 150 s
35 Air flow monitoring during pre-purge with fault lock-out
37 Post-purge time tPN: 150 s
38 Post-purge: actuator (if there is one) moves to the OPEN position and the air flow is not monitored.
40 Capacity control with IC 40
44 Controller enable signal delay time tRF: 0 s
45 Minimum enable time: 30 s
46 After operating signal: controller enable
47 Controller enable (timeout): 60 min.
62 Minimum pause time tfP: 0 s
63 Switch-on delay time tE: 0 s
65 Filling time before start-up: 0 s
67 Operating time in Manual mode unlimited
69 Function of terminal 51: RBW High position feedback
71 Function of terminal 66: no pre-purge in case of high temperature operation > 750°C
77 User-defined password
80 Fieldbus communication: with address check
Housing for control cabinet installation, for monitoring and controlling central safety functions in multiple burner systems on industrial furnaces, long service life due to replaceable power module for fail-safe outputs. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EC-type tested and certified, CSA and FM approved, certified for systems up to SIL 3 (compliant with PL e).
Series 500
Mains voltage: 230 V AC, 50/60 Hz
No integrated tightness control or POC
Modulating capacity control with interface for actuator IC
No temperature monitoring
Screw connection terminals
EU certified, CSA and FM approved, certified for systems up to SIL 3 (compliant with PL e)
Individual packaging
10 Emergency stop with fault lock-out
15 Air deficiency cut-out with fault lock-out
19 Safety time during operation: 1 s
27 No pre-purge during high temperature operation
29 Fan switched on in the event of fault
30 Fan run-up time tGV: 30 s
31 Fault lock-out if fan not running
32 Air flow monitoring during controlled air flow off, external valve controller enable
34 Pre-purge time tPV: 150 s
35 Air flow monitoring during pre-purge with fault lock-out
37 Post-purge time tPN: 150 s
38 Post-purge: actuator (if there is one) moves to the OPEN position and the air flow is not monitored.
40 Capacity control with IC 40
44 Controller enable signal delay time tRF: 0 s
45 Minimum enable time: 30 s
46 After operating signal: controller enable
47 Controller enable (timeout): 60 min.
62 Minimum pause time tfP: 0 s
63 Switch-on delay time tE: 0 s
65 Filling time before start-up: 0 s
67 Operating time in Manual mode unlimited
69 Function of terminal 51: RBW High position feedback
71 Function of terminal 66: no pre-purge in case of high temperature operation > 750°C
77 User-defined password
80 Fieldbus communication: with address check
Replacing a Kromschroder FCU 500WC0F1H0K1-E, 88621188 protective system control is a good solution to make your equipment work again. We offer a wide range of Kromschroder spare parts for burners, gas trains etc. We supply original Elster (Kromschröder) & Honeywell (Maxon) products.
If you have any queries about Kromschroder control units or any other Kromschroder spare parts, please write us at 624burner@gmail.com, quoting the item code 88621188.
- Voltage 230 V AC
- Weight, kg 0,78
- Commodity code 90268020
- Country of origin DE