Kromschroder FCU 500WC0F1H0K2-E, protective system control (88621798)
Brand: Kromschroder
SKU:
88621798
Kromschroder
88621798
Shipping methods
TNT delivery service
Pick up in our office
Payment methods
Invoice payment
Cash
Kromschroder protective system control
Housing for control cabinet installation, for monitoring and controlling central safety functions in multiple burner systems on industrial furnaces, long service life due to replaceable power module for fail-safe outputs. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EC-type tested and certified, CSA and FM approved, certified for systems up to SIL 3 (compliant with PL e).
Series 500
Mains voltage: 230 V AC, 50/60 Hz
No integrated tightness control or POC
Modulating capacity control with interface for actuator IC
No temperature monitoring
Spring force connection terminals
EU certified, CSA and FM approved, certified for systems up to SIL 3 (compliant with PL e)
Individual packaging
12 High gas pressure protection with fault lock-out
13 Low pressure cut-off with fault lock-out
15 Air deficiency cut-out with fault lock-out
19 Safety time during operation: 1 s
27 Pre-purge during high temperature operation
29 Fan switched on in the event of fault
30 Fan run-up time tGV: 0 s
32 Air flow monitoring during controlled air flow off, valve opens
34 Pre-purge time tPV: 180 s
35 Air flow monitoring during pre-purge with fault lock-out
37 Post-purge time tPN: 20 s
38 Post-purge: actuator (if there is one) moves to the OPEN position and the air flow is not monitored.
40 Capacity control with IC 20
44 Controller enable signal delay time tRF: 0 s
45 Minimum enable time: 0 s
46 After operating signal: controller enable
47 Controller enable (timeout): 60 min.
62 Minimum pause time tfP: 0 s
63 Switch-on delay time tE: 0 s
65 Filling time before start-up: 0 s
67 Operating time in Manual mode limited to 5 min.
69 Function of terminal 51: AND gating with the input at terminal 47 (air pressure switch)
77 User-defined password
80 Fieldbus communication: with address check
Housing for control cabinet installation, for monitoring and controlling central safety functions in multiple burner systems on industrial furnaces, long service life due to replaceable power module for fail-safe outputs. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft. EC-type tested and certified, CSA and FM approved, certified for systems up to SIL 3 (compliant with PL e).
Series 500
Mains voltage: 230 V AC, 50/60 Hz
No integrated tightness control or POC
Modulating capacity control with interface for actuator IC
No temperature monitoring
Spring force connection terminals
EU certified, CSA and FM approved, certified for systems up to SIL 3 (compliant with PL e)
Individual packaging
12 High gas pressure protection with fault lock-out
13 Low pressure cut-off with fault lock-out
15 Air deficiency cut-out with fault lock-out
19 Safety time during operation: 1 s
27 Pre-purge during high temperature operation
29 Fan switched on in the event of fault
30 Fan run-up time tGV: 0 s
32 Air flow monitoring during controlled air flow off, valve opens
34 Pre-purge time tPV: 180 s
35 Air flow monitoring during pre-purge with fault lock-out
37 Post-purge time tPN: 20 s
38 Post-purge: actuator (if there is one) moves to the OPEN position and the air flow is not monitored.
40 Capacity control with IC 20
44 Controller enable signal delay time tRF: 0 s
45 Minimum enable time: 0 s
46 After operating signal: controller enable
47 Controller enable (timeout): 60 min.
62 Minimum pause time tfP: 0 s
63 Switch-on delay time tE: 0 s
65 Filling time before start-up: 0 s
67 Operating time in Manual mode limited to 5 min.
69 Function of terminal 51: AND gating with the input at terminal 47 (air pressure switch)
77 User-defined password
80 Fieldbus communication: with address check
Replacing a Kromschroder FCU 500WC0F1H0K2-E, 88621798 protective system control is a good solution to make your equipment work again. We offer a wide range of Kromschroder spare parts for burners, gas trains etc. We supply original Elster (Kromschröder) & Honeywell (Maxon) products.
If you have any queries about Kromschroder control units or any other Kromschroder spare parts, please write us at 624burner@gmail.com, quoting the item code 88621798.
- Voltage 230 V AC
- Weight, kg 0,78
- Commodity code 90268020
- Country of origin DE