Kromschroder BCU 570WC0F2U0K1-E, burner control unit (88661094)

Kromschroder burner control unit
Housing for control cabinet installation, for controlling, igniting and monitoring modulating forced draught burners. For continuous operation with ionization control or UV control using Kromschroder UV sensor UVD. Intermittent operation with UV sensor UVS. Display of the program status, unit parameters and flame signal. Manual operating mode. Diagnosis and adjustment of unit parameters via optical interface using PC software BCSoft.
Series 570
EU certified, certified for systems up to SIL 3 (compliant with PL e)
Mains voltage: 230 V AC, 50/60 Hz
No valve proving system
Modulating capacity control with interface for RBW
Flammen?berwachung mit Ionisations- oder UV-Signal
Screw connection terminals
Individual packaging
Flame control: ionization
01 Burner switch-off threshold: 5 micro A
07 Burner start-up attempts: 1
09 Restart: no
10 Emergency stop with fault lock-out
12 High gas pressure protection with fault lock-out
13 Low pressure cut-off with fault lock-out
15 Air deficiency cut-out with fault lock-out
19 Safety time during operation: 1 s
40 Capacity control with RBW
30 Fan run-up time tGV: 0 s
32 Air flow monitoring during controlled air flow off, controller enable
33 Start-up with pre-purge: yes (depending on P34 Pre-purge time tPV)
34 Pre-purge time tPV: 6000 s
35 Air flow monitoring during pre-purge with fault lock-out
37 Post-purge time tPN: 6000 s
38 Air flow monitoring during post-purge: off; control element to maximum capacity
41 Selection of RBW running time: off; checking the positions for minimum/maximum capacity
44 Controller enable signal delay time tRF: 0 s
61 Minimum burner on time tB: 0 s
62 Minimum pause time tBP: 0 s
63 Switch-on delay time tE: 0 s
67 Operating time in Manual mode limited to 5 min.
69 Function of terminal 51: IC 40/RBW max. capacity feedback
77 User-defined password
78 Burner application: burner
80 Fieldbus communication: with address check
93 Pre-ignition time tVZ: 1 s
94 1st safety time on start-up: 5 s
95 Flame proving period 1 tFS1: 2 s

Replacing a Kromschroder BCU 570WC0F2U0K1-E, 88661094 burner control unit is a good solution to make your equipment work again. We offer a wide range of Kromschroder spare parts for burners, gas trains etc. We supply original Elster (Kromschröder) & Honeywell (Maxon) products.

If you have any queries about Kromschroder burner control or any other Kromschroder spare parts, please write us at 624burner@gmail.com, quoting the item code 88661094.