Honeywell C7035A1031/U UV flame detector

Honeywell C7035A1031/U photo cells are designed to detect ultraviolet radiation emitted by a flame and are integrated into Honeywell flame monitoring systems to ensure reliable flame detection in gas, oil and combined burners.

Features

- The Resideo C7035A1031/B UV sensors are compatible with the R7249A, R7290A, R7749B and R7849A,B amplifiers, as well as with the corresponding Honeywell control devices.

- The UV cells C7035A1031 is equipped with a built-in cuff with an internal thread of 1-11-1/2 NPSM for installation on a one-inch inspection tube.

- The detector housing complies with the moisture protection standards of Underwriters Laboratories Inc. and NEMA standards for cabinets of type 4 and 4X.

- With proper installation, the C7035A1031 sensors can operate at pressures up to 5 psi.

- The C7035A1031/U UV reading tube can be replaced on site.

Specifications

- Flame detection: End of flame.

- Ambient temperature range: -18°C to +121°C or -40°C to +121°C, depending on the model.

- Maximum allowable pressure: 5 psi (34.5 kPa).

- Installation: Cuff with 1-11-1/2 NPSM internal thread for installation on a one-inch inspection tube.

- Electrical connections: Two 6 ft [1.83 m] long wires, color-coded, NEC Class 1, rated up to 204°C.

Spare parts

1. Flange seal 129808.

2. UV reading tube 139464M (18° – +121°C).

3. UV reading tube 139464N (18° – +121°C).

The installation of an ultraviolet flame detector requires compliance with two axes.

Replacing a Honeywell C 7035 A 1031/U UV flame detector is a good solution to make your equipment work again. We offer a wide range of Honeywell spare parts for burners, gas trains etc. We supply original Elster (Kromschröder) & Honeywell (Maxon) products.

If you have any queries about Honeywell industrial flame detectors or any other Honeywell spare parts, please write us at 624burner@gmail.com, quoting the item code C7035A1031/U.