Honeywell VE4010B1054 solenoid valve DN10 360 mbar 110V DIN IP65

Honeywell VE4010B1054 gas control unit used for control and regulation of gaseous fluids in gas power burners, atmospheric gas boilers, melting furnaces, incinerators and other gas consuming appliances.

Honeywell VE4010B1054 gas valve features:

• Normally Closed valve (spring loaded valve disc, closed when de-energized)
• Adjustable flow rate regulator on top of the coil
• Opening/closing time: 1 sec
• Maximum working frequency: 20 cycles/min
• Wrench boss as well on inlet side as on outlet side for pipe fitting incorporated in the valve housing
• 2 auxiliary pressure taps with Rp 1/4” threaded connections, both on the inlet pressure side
• Coil field replaceable
• Coil suitable for permanent energization
• Coil turnable over 360°
• Internal fine mesh screen

Honeywell VE4010B 1054 combined gas valve technical data:

• Pipe sizes: Inlet and outlet 3/8” up to 2” internal parallel pipe thread according to ISO 7-1
• Mounting and orientation: The valve may be assembled on the pipeline within plus or minus 90 degrees of the vertical axis and 30 cm. air space around the coil assy
• Torsion and bending stress: Pipe connections meet group 2, according to EN161 requirements
• Ambient temperature range: -15 ... 60 °C
• Electrical connection: Plug connection according to PG11
• Optional: Male DIN plug connector according to ISO4400
• Coil insulation solenoid valves: Insulation material according to class F
• Valve body: Aluminum alloy die-cast
• Bottom plug: Rp 1/4” for Closed Position Indication (CPI) switch
• Strainer: AISI 303 steel
• Closing spring: AISI 302 steel
• Valve plunger: Chrome plated Fe 360B steel sliding on anti-friction bearing
• Seals and gaskets: Hydrocarbon resistant NBR rubber type
• Optional: Viton rubber type
• Rated Voltage (Vac): 110
• Connect. (inch): 3/8
• DN: 10
• Maximum Operating Pressure (mbar): 360
• Power Cons. (W): 14
• Enclosure: IP65
• Weight (kg): 1.1

Honeywell VE4010B 1054 CVI valve standards and approvals:

Honeywell VE4010 B 1054 gas solenoid valve in accordance with EN161 standards. Honeywell VE4010B1054 compact gas unit conform to the following EC directives:

• Gas Appliance Directive (90/396/EEC) PIN: CE-0063AP3075/1
• Low Voltage Directive (73/23/EEC)
• Electro Magnetic Compatibility Directive (89/336/EEC)

Replacing a Honeywell VE 4010 B 1054 solenoid valve DN10 is a good solution to make your equipment work again. We offer a wide range of Honeywell spare parts for burners, gas trains etc. We supply original Elster (Kromschröder) & Honeywell (Maxon) products.

If you have any queries about Honeywell shut-off gas valves or any other Honeywell spare parts, please write us at 624burner@gmail.com, quoting the item code VE4010B1054.